Satellite reference

Film World Channel

DTHsat Updated 13-11-2026

Film World Channels Frequency

Film World Frequency TP Free to Air

Film World Paksat 1R Satellite

Film-World-Frequency

Film World Frequency

Film World Frequency on Satellite Paksat 1R 38.0° East LNB Type C Band Updated 13-11-2026

Channel Name

Frequency

Polarity

Symbol Rate

Film World

3852

V

3250

Film World Frequency on Satellite Paksat 1R 38.0° East LNB Type C Band Updated 13-11-2026

Paksat Satellite 38.0°E TV Channels List Strong Frequency TP for Dish Antenna setting C Band and KU Band Free to Air FTA Channels list with full details guide

Asiasat 7 Satellite 105.5°E Channels List Strong Frequency TP for Dish Antenna setting C Band and KU Band Free to Air (FTA) and Package paid TV Channels list with full details guide

How to use the service reference

The table for Film World Channel includes Film World at 3852 MHz, polarity V, with symbol rate 3250. Read the satellite and access notes alongside that row before entering the settings. The numbers describe one listed carrier and may be shared by several services.

When a receiver shows several versions of the same name, compare the satellite, provider and service information on each result. Standard-definition, HD and regional feeds may be separate services. Keep the existing entry until you have confirmed which version is available, and use the access note to determine whether a subscription is required.

Checking the receiver result

A signal strength reading can indicate that the receiver sees power or energy at its input. Signal quality is the more useful reading for confirming that it can lock to the selected carrier. If quality stays at zero, check the satellite selection, the LNB settings and the switch port. If several known active carriers also fail, inspect alignment and cabling before changing individual channel entries.

After the receiver locks, run a manual transponder scan and review the results by service name. Check the scan filter if the expected service is missing. A free-to-air-only filter can exclude encrypted services from the results. Save a working channel only after confirming that it matches the intended service, especially if the receiver already holds several similarly named entries.

Frequently asked questions

Which settings should I use for Film World Channel?

Start with the relevant row in the table. Match the frequency, polarity and symbol rate together and check that your receiver is on the satellite named with the entry.

Why does a scan show signal but no picture?

Check whether the receiver actually has signal quality and carrier lock. If it does, verify that the service is still in the scanned package and that the receiver supports its video format and access requirements.

Will the same settings work in every location?

Reception depends on the satellite beam and the dish setup at your location. Compare the listed beam with your region, and use a known active transponder on the same satellite to check reception.