Satellite reference

LNB Frequency list

LNB Frequency List. C-band and Ku-band receiver settings.

DTHsat updated 13-11-2026

LNB Frequency List LNB Frequency Update

LNB Frequency position LNB type Strong TP Frequency

LNB Frequencys list Frequency list

LNB Frequency Channel paid and free DTH Packages TV Channels Strong Frequency TP

LNB Frequency List

CCTV 1 Channel on CCTV 1 on Apstar 9 Satellite 142.0°East

Willow TV Channel on Satellite Anik F3 Satellite 118.8°West

Can TV Channel on Satellite Hotbird 13E

Al Hiwar TV Channel on Satellite Hotbird 13E

ESPN US Free LNB Frequency Channels from

East free to air

LNB Frequency Free Sat

Gsat 8 Satellit channel TV Frequency LNB KU Band Type

Zambia TV Channel Free Satellite

Amazonas-2-3-5 LNB Frequency Channel List LNB Type C Band and KU Band

Ukraine LNB Frequency Channels List LNB Frequency Type C Band and KU Band

Galaxy 11 Satellite West LNB KU Band and C Band LNB

Arabsat-5A /6A 30.5°East C/KU

Thaicom 7 Channel List Frequency LNB Type KU Band

Intelsat 21 Channel List Frequency LNB Type KU Band

Galaxy 25 Satellite West LNB KU Band and C Band LNB

Astra 3B 23.5°East KU/KA

Europe Free LNB Frequency Channels from Europe

France Free Satellite TV Channels from France

Thaicom 4 Channel List Frequency LNB Type KU Band

Galaxy 13 Satellite West LNB KU Band and C Band LNB

Galaxy 12 Satellite West LNB KU Band and C Band LNB

Philippines Free Satellite TV Channel from Philippines

Indonesia Free Satellite TV Channels from Indonesia

Koreasat 5Koreasat 5A 113.1°East LNB KU

Astra-1KR 1L/1M/1N 19.2°East Ku/Ka

ABS 2 /2A 75°East C/Ku

Gsat 8 Satellit channel TV Frequency LNB KU Band Type

How to use the service reference

Use this page to identify LNB Frequency list and check which details are available before you change receiver settings. Where a confirmed tuning entry is absent, start with the exact service name or satellite position and compare it against a current listing for your region.

When a receiver shows several versions of the same name, compare the satellite, provider and service information on each result. Standard-definition, HD and regional feeds may be separate services. Keep the existing entry until you have confirmed which version is available, and use the access note to determine whether a subscription is required.

Checking the receiver result

A signal strength reading can indicate that the receiver sees power or energy at its input. Signal quality is the more useful reading for confirming that it can lock to the selected carrier. If quality stays at zero, check the satellite selection, the LNB settings and the switch port. If several known active carriers also fail, inspect alignment and cabling before changing individual channel entries.

After the receiver locks, run a manual transponder scan and review the results by service name. Check the scan filter if the expected service is missing. A free-to-air-only filter can exclude encrypted services from the results. Save a working channel only after confirming that it matches the intended service, especially if the receiver already holds several similarly named entries.

Frequently asked questions

Which settings should I use for LNB Frequency list?

Confirm the exact name and look for a current carrier listing that includes the satellite, frequency, polarity and symbol rate. Enter all four details from the same listing.

Why does a scan show signal but no picture?

Check whether the receiver actually has signal quality and carrier lock. If it does, verify that the service is still in the scanned package and that the receiver supports its video format and access requirements.

Will the same settings work in every location?

Reception depends on the satellite beam and the dish setup at your location. Compare the listed beam with your region, and use a known active transponder on the same satellite to check reception.

Match the oscillator to the installed LNB

The LNB oscillator setting is separate from the transponder frequency entered in the scan menu. A universal Ku-band LNB commonly uses 9750 MHz and 10600 MHz oscillators. Read the installed LNB label first, especially if your dish uses a single-oscillator, C-band or provider-specific setup.

Frequently asked question

Should every Ku-band LNB use 9750/10600?

Use those values for hardware specified as universal 9750/10600. Other LNBs may require different settings.