Mega TV Greece Satellite Frequency Reference
Find Greece’s MEGA channel on Hotbird 13F for Nova or Eutelsat 9B for Magenta TV. Check your package before tuning.
Satellite tuning settings
| Satellite | Frequency (MHz) | Polarity | Symbol rate (kS/s) | FEC | System | Access or package |
|---|---|---|---|---|---|---|
| Hotbird 13F (13°E) | 11823 | H | 27500 | 3/4 | DVB-S2 / 8PSK | Nova |
| Eutelsat 9B (9°E) | 12399 | H | 27500 | 2/3 | DVB-S2 / 8PSK | Magenta TV |
Sources and current listings — LyngSat
How to use the service reference
The table for Mega TV Greece Satellite Frequency Reference includes Hotbird 13F (13°E) at 11823 MHz, polarity H, with symbol rate 27500. Read the satellite and access notes alongside that row before entering the settings. The numbers describe one listed carrier and may be shared by several services.
When a receiver shows several versions of the same name, compare the satellite, provider and service information on each result. Standard-definition, HD and regional feeds may be separate services. Keep the existing entry until you have confirmed which version is available, and use the access note to determine whether a subscription is required.
Checking the receiver result
A signal strength reading can indicate that the receiver sees power or energy at its input. Signal quality is the more useful reading for confirming that it can lock to the selected carrier. If quality stays at zero, check the satellite selection, the LNB settings and the switch port. If several known active carriers also fail, inspect alignment and cabling before changing individual channel entries.
After the receiver locks, run a manual transponder scan and review the results by service name. Check the scan filter if the expected service is missing. A free-to-air-only filter can exclude encrypted services from the results. Save a working channel only after confirming that it matches the intended service, especially if the receiver already holds several similarly named entries.
Frequently asked questions
Which settings should I use for Mega TV Greece Satellite Frequency Reference?
Start with the relevant row in the table. Match the frequency, polarity and symbol rate together and check that your receiver is on the satellite named with the entry.
Why does a scan show signal but no picture?
Check whether the receiver actually has signal quality and carrier lock. If it does, verify that the service is still in the scanned package and that the receiver supports its video format and access requirements.
Will the same settings work in every location?
Reception depends on the satellite beam and the dish setup at your location. Compare the listed beam with your region, and use a known active transponder on the same satellite to check reception.
Distinguish the Greek channel from namesakes
This page concerns Mega TV Greece. Spanish-language services using the Mega TV name have different schedules, regions and carriage. Check the region and provider associated with the table before using its transponder to troubleshoot a receiver.
If your platform refresh still shows several Mega entries, open the information screen and compare the language and service name. On a managed package, use its normal refresh procedure before entering manual satellite settings. This also helps preserve the operator's channel ordering.
Frequently asked question
Can I use this listing for a Spanish-language Mega TV service?
Use a guide for the specific regional service. The rows here refer to the Greek channel.